Saving Your System Configuration To A Usb Thumb Drive - FLIR M6100 Series Instruction Manual

14 Using the Main Menu
To configure other display settings:
1. From the Main Menu, click
2. Configure the following:
• Time Display: Check to show the time on the monitor.
• Channel Display: Check to show the channel names on the monitor.
• Original Rate: Display video at its actual size.
• Transparency: Select the menu transparency.
3. Click OK to save changes.

14.3.21 Saving Your System Configuration to a USB Thumb Drive

The system allows you to save your current system configuration to a USB thumb drive
(not included). This is useful if you want to backup your current settings.
NOTE
This function only saves settings created in system menus. It does not save or backup any video.
To save your system configuration to a USB thumb drive:
1. Insert a USB thumb drive (not included) into one of the USB ports.
#LX400100; r.46796/46796; en-US
and then click Setting>Display>Display.
70