Saving Your System Configuration To A Usb Thumb Drive; Setting The System To Factory Defaults - FLIR DNR500 series Instruction Manual

15 Using the Main Menu

15.3.26 Saving Your System Configuration to a USB Thumb Drive

The system allows you to save your current system configuration to a USB thumb drive
(not included). This is useful if you want to backup your current settings.
NOTE
This function only saves settings created in system menus. It does not save or backup any video.
To save your system configuration to a USB thumb drive:
1. Insert a USB thumb drive (not included) into one of the USB ports.
2. From the Main Menu, click
3. Under Device Name, select the USB device where you would like to save the
configuration.
4. Click EXPORT to save your current system configuration.
To restore a saved system configuration:
1. Insert a USB thumb drive (not included) with a saved system configuration into one of
the USB ports.
2. From the Main Menu, click
3. Under Device Name, select the USB device.
4. Click the folder with the configuration files you would like to restore. Configuration file
folders are labeled "Config" and then the time and date the configuration was saved
(e.g. Config_20140425103727).
5. Click IMPORT to restore the system configuration.
6. Click OK to confirm. The system will restart to complete the operation.

15.3.27 Setting the System to Factory Defaults

The Default menu allows you to reset the system to factory default settings.
#LX400023; r.30361/30361; en-US
and then click Setting>Config Backup.
and then click Setting>Config Backup.
72