Event - FLIR M6100 Series Instruction Manual

14 Using the Main Menu
To configure Email Alerts:
1. From the Main Menu, click
2. Check Enable to enable email notifications.
3. Configure the following:
• Mail Select: Select the email provider.
• SMTP Server: If using your own email server, enter the SMTP server address.
• Port: If using your own email server, enter the port used by the SMTP server.
• Anonymous: If using your own email server, check if your server supports anony-
mous log ins. Otherwise, leave this unchecked.
• User Name: If using your own email server, enter the SMTP user name.
• Password: If using your own email server, enter the SMTP password.
• Email Schedule: Create a schedule for receiving email notifications.
• Receiver: Enter the email address that will receive alerts.
• Sender: Enter the sender's email address.
• Subject: Enter the subject line for the email alert.
• Attachment: Check to include a jpg image attachment of the camera.
NOTE
You must enable the Snapshot option for motion detection on each camera you would to receive
attachments. For details, see 14.3.7 Configuring Motion Detection, page 56.
• Encrypt Type: If using your own email server, select SSL or TLS if your server uses
encryption. Select None if your server does not use encryption.
• Event Interval: Enter the interval between alert emails.
• Health Enable: Check to enable health check emails. Health check emails will be
sent periodically to ensure that the system is functioning normally.
• Interval: Enter the interval in minutes for health check emails.
4. Click Test to send a test email.
5. Click OK to save settings.

14.3.6 Event

The Event menu allows you to configure settings for motion detection, video loss, and sys-
tem warnings.
#LX400100; r.46796/46796; en-US
and then select Network>Email.
55