Ddns Setup-Access Your System Remotely Over The Internet; Step 1 Of 4: Port Forwarding - FLIR M6100 Series Instruction Manual

18 DDNS Setup (Advanced)
7. Click and drag Default Group to the display window to open your cameras in live view.
Result
18.2 DDNS Setup—Access your System Remotely over the Internet
Setting up DDNS connectivity allows you to view your system from any computer or com-
patible mobile device with Internet access.
To set up remote connectivity with your system, you must:
1. Port forward the HTTP port (default: 80) and Client port (default: 35000) on your router
to your system's IP address.
2. Create a DDNS account.
3. Enable DDNS on the system.
4. Test the remote connection by entering your DDNS address in the client software.

18.2.1 Step 1 of 4: Port Forwarding

You must port forward the HTTP port (default: 80) and Client port (default: 35000) on your
router to your system's IP address before you can remotely connect to your system. There
are several methods to port forward your router:
149
#LX400100; r.46796/46796; en-US