Setting The System To Factory Defaults; Upgrading Firmware From Usb - FLIR M6100 Series Instruction Manual

14 Using the Main Menu

14.3.22 Setting the System to Factory Defaults

The Default menu allows you to reset the system to factory default settings.
To reset the system to factory default settings:
1. From the Main Menu, click
2. Check the menus you would like to reset to default settings or check Factory Default
to reset the entire system to default settings.
3. Click OK.

14.3.23 Upgrading Firmware from USB

Firmware upgrades provide enhanced functionality. The system will automatically check
for firmware upgrades if it is connected to the Internet. The system also supports firmware
upgrades from a USB thumb drive (not included).
To upgrade firmware from a USB drive:
1. Download the firmware upgrade from
2. Extract the firmware file and copy the firmware to a blank USB thumb drive.
NOTE
Do not have any folders on the USB thumb drive—just the firmware file.
3. Insert the USB thumb drive to a USB port on the system.
#LX400100; r.46796/46796; en-US
and then click Setting>Default.
www.flir.com/security/pro.
72