Table of Contents
Advertisement
14
Using the Main Menu
4. Configure the following to customize settings for video loss events:
• Period: Click Setup to configure a schedule for video loss events. It is recom-
mended to leave this on the default setting, so you can be alerted at any time one of
your cameras loses video.
• Show Message: Check to show a popup message on the monitor if one of your
cameras loses video.
• Send Email: Check to enable email alerts. You must configure email alerts before
you will be able to receive them (see 14.3.5 Configuring Email Alerts, page 54).
• Record Channel: Click the checkbox to enable video recording when video loss
occurs. You can then select the channels the system will record when video loss oc-
curs on the currently selected channel.
• PTZ Activation: Check to enable PTZ actions when video loss occurs (PTZ camera
required; not included). Click Setup to select which PTZ actions will be taken by
each camera.
• Post_REC: Enter the number of seconds the system will record after video loss
occurs.
• Sequence: Check to enable a custom sequence mode when video loss occurs on
the selected channel. Then click the channels you would like to display in the cus-
tom sequence mode.
• Snapshot: Click the box to enable snapshot recording when video loss occurs. You
can then select which channels will save snapshots when video loss occurs on the
currently selected channel.
• Buzzer: Check to enable the system buzzer when video loss occurs on the cur-
rently selected channel.
5. Click OK to save changes.
14.3.9 Configuring Tamper Detection
You can choose how the system reacts to any signs of tampering (i.e., cameras being
moved, damaged or blocked out). Configure tamper detection for recording and notifica-
tion options in the event of tampering.
To configure tamper detection:
1. From the Main Menu, click
2. Select the channel to configure tamper detection for.
3. Check Enable.
#LX400100; r.46796/46796; en-US
and then click Event>Motion>Tampering.
59
Advertisement
Table of Contents
