Configuring General System Settings - FLIR M6100 Series Instruction Manual

14 Using the Main Menu
1. From the Main Menu, click
2. Click the hard drive you would like to configure.
3. Under Type, select Read-write HDD or Read-only HDD.
4. Click OK to save changes. The system will restart to complete this operation.

14.3.19 Configuring General System Settings

You can use the General menu to configure miscellaneous system settings.
To configure general settings:
1. From the Main Menu, click
#LX400100; r.46796/46796; en-US
and then click Storage>HDD Manager.
and then click Setting>General>General.
68