Table of Contents
Advertisement
16
Using FLIR Cloud™ Client for PC or Mac
5. Use the chart to select which presets you would like to include in the tour and the order
of presets.
• Preset: Select the preset number.
• Time(s): Enter the time in seconds the camera will remain on the selected preset.
• Operation: Click
the tour.
6. Click OK to save changes.
To run a PTZ tour:
• Select the tour number and click
16.3.3 PTZ Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click
to open the Advanced controls. Select Pattern.
2. Select the number of the pattern you would like to set up.
#LX400100; r.46796/46796; en-US
to add a preset to the tour. Click
.
to delete a preset from
87
Advertisement
Table of Contents
