Saving Your System Configuration To A Usb Thumb Drive - FLIR Lorex NR800 Series Instruction Manual

13 Using the Main Menu
To set the monitor resolution:
1. From the Main Menu, click
2. Under Resolution, select the correct resolution for your monitor: 1920x1080,
1280x1024, 1280x720, or 1024x768.
3. Click OK to save changes. Click OK again to restart the system using the new
resolution.
To configure other display settings:
1. From the Main Menu, click
2. Configure the following:
• Transparency: Select the menu transparency.
• Time Display: Check to show the time on the monitor.
• Channel Display: Check to show the channel names on the monitor.
• Original Scale: Check to set the system to show the true aspect ratio of the cam-
eras on the live display. This may add black bars on the top and bottom of the
image.
• Image Enhance: Check for the system to digitally improve the video quality on the
live display. This setting does not affect recordings.
3. Click OK to save changes.

13.3.25 Saving Your System Configuration to a USB Thumb Drive

The system allows you to save your current system configuration to a USB thumb drive
(not included). This is useful if you want to backup your current settings.
#LX400021; r. 7.0/42449/42450; en-US
and then click Setting>Display>Display.
and then click Setting>Display>Display.
74