Certificate Of Calibration - Keysight Technologies N5244/5B Service Manual

Tests and Adjustments
About System Verification and Performance Tests

Certificate of Calibration

Keysight Technologies will issue a certificate of calibration upon successful
completion of system verification or completion of the performance tests. The
certificate of calibration will apply to the "system" (analyzer, calibration kit, test
cables, and any necessary adapters) if the system verification procedure is
used to confirm the system specifications. If the performance tests are used to
confirm instrument specifications, the certificate of calibration will apply to the
PNA as an independent instrument. The equipment and measurement
standards used for the tests must be certified and must be traceable to
recognized standards.
If you have a measurement application that does not use all of the
measurement capabilities of the analyzer, you may ask your local Keysight
Technologies service office to verify only a subset of the specifications.
However, this "limited calibration" creates the possibility of making
inaccurate measurements if you then use the analyzer in an application
requiring additional capabilities.
Keysight N5244B/45B Service Guide 3-9