Keysight Technologies N5244/5B Service Manual page 516

Replaceable Parts
Replaceable Parts Listings
Reference Part Number
a
Type
Designator
W117 SR N5245-20092
W118 SR N5245-20091
W123 SR N5245-20155
Was N5245-20104
SR N5245-20180
W183
W184 SR N5245-20184
SR N5245-20181
W185
SR N5245-20185
W186
W195 F N5240-60097
W196
SR N5245-20195
c
W203
a. SR = semirigid coaxial cable; F = flexible coaxial cable
b. Some PNA models have newer model A27/A28 mixer blocks installed. A68/A69 3 dB attenuators are only applicable to
instruments with legacy 5087-7323/5087-6323 mixer bricks. The new 5087-7417 mixer brick have the 3 dB pads
integrated into the mixer brick assembly. Legacy A27/A28 mixer bricks use the 5245-20021 semi-rigid cable. New mixer
bricks use the N5245-20191 semi-rigid cable.
c. On instruments with a new HMA26.5 the N5245-20048 cable is used in all 2-port and 4-port instruments. And, on
instruments with legacy HMA26.5, N5245-20150 is used on all 2-port instruments with Option 029. But, on 4-port
instruments with a new HMA26.5 N5245-20196 is used with Option 029. If you are unclear which HMA26.5 assembly your
PNA has installed, refer to
on page 45.
6-282
Qty Description
1 A52 port 4 mechanical switch to PORT 4 SW SRC OUT (J4)
1 A52 port 4 mechanical switch to PORT 4 SW TSET (J3)
4 Rear panel jumper
1 Cable, assy-RF, Port 3 CPLR THRU to A72 port 3 bias combiner, port
3
1 Cable, assy-RF, A72 port 3 bias combiner to A34 test coupler, port 3
1 Cable, assy-RF, Port 4 CPLR THRU to A73 port 4 bias combiner, port
4
1 Cable, assy-RF, A73 port 4 bias T combiner to A35 test coupler, port
4
2 Cable (long), assy, coaxial LFE, RF (Port 3 bias combiner "RF-IN" to
"Port3" A70 LFE board)
Cable (long), assy, coaxial LFE, RF (Port 4 bias combiner "RF-IN" to
"Port4" A70 LFE board)
1 A25 HMA26.5 (Top) to A28 mixer brick input
"Verify the Model/Version of HMA26.5 Installed" on page 7-45 and to Figure 7-20
Keysight N5244B/45B Service Guide