Keysight Technologies N5244/5B Service Manual page 636

Repair and Replacement Procedures
Post-Repair Procedures
Table 7-2 Related Service Procedures (Continued)
Replaced Assembly
A14 frequency reference board
A15 13.5 GHz LO synthesizer
board
7-96
Adjustments
and Other Procedures
10 MHz Frequency Reference
AdjustmentEE Default
Adjustment: Synth LO only
Synthesizer Bandwidth
a
Adjustment
Source Adjustment
IF Gain Adjustment
Receiver Characterization
Receiver Adjustment
IF Response Adjustment
(Available Only with Option
S93093/4A/B and or
S93900/1/2/4/5/7A/B Installed)
Noise Figure Adjustment
(Available with Option 029 with
S93029A/B Installed)
Restore option data (Refer to
"Repairing and Recovering Option
Data" in Chapter 8.)
EE Default Adjustment: Synth LO
only
Synthesizer Bandwidth
a
Adjustment
Source Adjustment
IF Gain Adjustment
Receiver Characterization
Receiver Adjustment
IF Response Adjustment
(Available Only with Option
S93093/4A/B and or
S93900/1/2/4/5/7A/B Installed)
Noise Figure Adjustment
(Available with Option 029 with
S93029A/B Installed)
Verification, Performance,
and Other Tests and Procedures
Frequency Accuracy TestSource
Power Accuracy Test
Source Maximum Power Output
Test
Source Power Linearity Test
The Operator's Check
Frequency Accuracy Test
Source Power Accuracy Test
Source Maximum Power Output
Test
Source Power Linearity Test
The Operator's Check
Keysight N5244B/45B Service Guide