Keysight Technologies N5244/5B Service Manual page 555

Repair and Replacement Procedures
Removing and Replacing the A1–A3 and Other Front Panel Subassemblies
10. With a T-6 TORX (set to 3-in-lb), remove the 2 screws (item [23]) on the
During re-assembly of the side brackets to the LCD display, it is very
important to avoid over-tightening.
11. The touch screen can now be removed from the front panel assembly.
Figure 7-3 Front Panel Sub-assemblies Removal
Keysight N5244B/45B Service Guide
2nd side bracket (item [21]).
Note the orientation of the touch screen in the front panel assembly for
installation of the new touch screen.
7-15