Keysight Technologies N5244/5B Service Manual page 92

Tests and Adjustments
Adjustments
Figure 3-21 Equipment Setup 1 for the Receiver Adjustment
5. When prompted, disconnect the cable from port 2 and connect it to the
power sensor. See
Figure 3-22 Equipment Setup 2 for the Receiver Adjustment
6. When prompted, disconnect the sensor from the cable, and insert the ECal
module between port 2 and the free end of the cable. Connect the ECal
module directly to port 2 without using any adapters if possible. See
Figure
3-60
Figure 3-22.
3-23.
Keysight N5244B/45B Service Guide