Keysight Technologies N5244/5B Service Manual page 329

Replaceable Parts
Replaceable Parts Listings
Bottom Ribbon Cables and Wire Harnesses, 2-Port, Options 217, S/N
Prefixes ≥6021
Reference Part Number
a
Type
Designator
10R N5242-60005

10R N5245-60026

Was 8121-0982, or
N5242-60007
16R N5245-60006

2W 8121-0966

3W

N5225-60001
Was N5242-60009
20R N5247-60015

Was N5245-60008
3W

N5225-60001
Was N5242-60009
16R N5245-60006

10R N5245-60026

Was 8121-0982, or
N5242-60007
24R N5230-60014

Was N5242-60011
100R N5242-60004
11
25R E4410-60160
12
36R 8121-0834
13
a. nR = n wires in a ribbon (flat) cable; nW = n wires in a wire harness
b. If you are replacing an old LED board wire harnesses with a current version (N5225-60001), both wire harnesses must be
replaced. You must also replace the old test set front plate with a current version (2-port N5224-00004, or 4-port
N5224-00005). While replacing the test set front plate, both LED boards must be removed and reinstalled after being
rotated180 degrees.
Keysight N5244B/45B Service Guide
1
Description
Rear-panel PWR I/O to A23 test set motherboard J301
A23 test set motherboard J205 to A46 port 1 receiver attenuator
A23 test set motherboard J549 to A38 port 1 source attenuator
A23 test set motherboard J554 to A37 reference mixer switch
A23 test set motherboard J221 to ports 1/3 LED board J1
b
A23 test set motherboard J551 to A27 mixer brick (1) J52
A23 test set motherboard J222 to ports 2/4 LED board J1
b
A23 test set motherboard J546 to A41 port 2 source attenuator
A23 test set motherboard J208 to A49 port 2 receiver attenuator
A23 test set motherboard J209 to A25 HMA26.5 J1
A18 system motherboard J1 to A23 test set motherboard J1 to
A24 IF multiplexer board J1
A18 system motherboard J13 to A23 test set motherboard J545
Rear-panel HANDLER I/O to A23 test set motherboard J400
1. For bulkhead connectors, refer to
page 6-295.
"Bottom Hardware and Miscellaneous Parts" on
6-95