Set Forwarding Feature Service; Set Message Waiting Indicator Feature Service - Panasonic Selection 470 Programmer's Manual

Section 470 - TSAPI Programmer's Guide

Set Forwarding Feature Service

Function: cstaSetForwarding( ), CSTASetFwdConfEvent
Direction: C → S
Functional Description:
Service Parameters:
Ack Parameters:
Nak Parameter:
Notes:

Set Message Waiting Indicator Feature Service

Function: cstaSetMsgWaitingInd( ), CSTASetMwiConfEvent
Direction: C → S
Functional Description:
Service Parameters:
Ack Parameters:
Nak Parameter:
DBS-92-470
The Set Forwarding Service sets the DBS Call Forwarding feature on or off for a user sta-
tion. The DBS supports Call Forward Immediate, Call Forward Busy, and Call Forward
No Answer types.
device
forwardingType
forwardingOn
forwardingDN
noData
universalFailure
• INVALID_CSTA_DEVICE_IDENTIFIER (12)
An invalid device identifier has been specified in device.
• RESOURCE_OUT_OF_SERVICE (34)
The DBS is off-line.
• OUTSTANDING_REQUEST_LIMIT_EXCEEDED (44)
The application has too many outstanding CSTA requests.
• GENERIC_UNSPECIFIED (0)
Internal driver error.
• GENERIC_OPERATION (1)
An unsupported call forward type was specified.
• COS - the user must have a COS that given them the ability to set DND.
This service sets on or off the DBS message waiting indicator (MWI) for a user station.
device
messages
noData
Issued April 2000
[mandatory] specifies the station on which the Call Forwarding
feature is to be set. It must be a valid DBS extension.
[mandatory - partial] specifies the type of forwarding to set or
clear.
[mandatory] specifies either on (TRUE) or off (FALSE).
[mandatory] specifies the station extension or off premise
destination to which the calls are to be forwarded. It is
mandatory if forwardingOn is set to on. It is ignored if the
forwardingOn is set to off.
None for this service.
[mandatory] must be a valid DBS extension that supports the
MWI feature.
[mandatory] specifies either on (TRUE) or off (FALSE).
None for this service.
17