Text Message (Sms) Alert; Alert Settings For Your Dect Phone - Panasonic KX-TGF372 Operating Instructions Manual

– Android phone: Bluetooth must be
turned on.
– Android phone: [Application Alerts
*1
manager] must be turned on.
– Handset or base unit: "Alert On/
Off" must be turned on (page 59).
R If this feature does not work, turn on your
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
*1 Turning on [Application Alerts
manager]
Use the following procedure after
installing the Link to Cell app.
Android 2.x: Open your device's
[Settings] app. a Tap [Accessibility].
a Turn on the [Accessibility] and
[Application Alerts manager]
checkboxes.
Android 4.x: Open your device's
[Settings] app. a Tap [Accessibility].
a Turn on [Application Alerts
manager].
Requirements
R An Android device (Android 2.1 or later)

Text message (SMS) alert

®
For iPhone and BlackBerry
This feature alerts you on your DECT phone
when your paired cellular phone receives SMS
messages. The Link to Cell app is not required
for iPhone and BlackBerry users.
Important:
R Your cellular phone must support MAP
(Message Access Profile) specification.
R For further information, refer to the
instructions on web page listed below:
www.panasonic.net/pcc/support/tel/sms/
R To use this feature, the following settings
are required:
– iPhone and BlackBerry Phone:
Bluetooth must be turned on.
– Handset or base unit: "Alert On/
Off" must be turned on (page 59).
For assistance, please visit www.panasonic.com/support
TGF37x(en)_1128_ver032.pdf
R If this feature does not work, turn on your
Alert settings for your
DECT phone
If your cellular phone is paired to the base unit
and receives notifications, the handset and/or
base unit can alert you:
– by briefly displaying a message
– by announcement (English only)
– by sounding alert tones
Important:
R For Android users: Use the Link to Cell app
Turning alert on/off
Once this feature is turned on, it will alert you
on the handset and base unit when your
cellular phone receives notifications.
– "On" (default): The handset and/or base
– "Off": The handset and/or base unit do
You can configure this setting using either the
base unit or one of the handsets.
®
users
1
2
3
Note:
R In step 1, you can also enter the "Alert
Setting the voice alert
You can turn on/off the voice alert.
– "On" (default): The handset and/or base
59
Using Bluetooth® Devices
device's Bluetooth feature, unplug the base
unit's AC adaptor, and then reconnect it.
to enable the desired alerts (page 58).
unit alert you.
not alert you.
Handset / Base unit
For CELL 1: MMENUN#6101
For CELL 2: MMENUN#6102
MbN: Select the desired setting. a
MSAVEN
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
settings" menu by pressing and holding
MAPP ALERTSN on the base unit.
unit notify you by voice announcement.
2014/11/28 16:08:42
59