Connecting Your Treo Device To Your Computer - Palm Treo 700p User Manual

Connecting Your Treo Device to Your Computer

1.
Plug the AC charger into a wall outlet.
2.
Plug the USB sync cable into an available USB port or a powered USB hub on
your computer.
3.
With the sync button facing up, connect the sync cable to the bottom of
your device. Do not press the sync button until you are instructed to do so.
4.
Connect the charger cable to the connector on the sync cable.
You are now ready to synchronize. Go to "Synchronizing Information—The Basics"
on page 33.
32
Sync Cable
Sync Button
Section 1C: Connecting to Your Computer