Connecting Your Palm Centro™ Smart Device to Your Computer
1.
Plug the AC charger into a wall outlet.
2.
Plug the USB sync cable into an available USB port or a powered USB hub on your
computer.
3.
With the sync button facing up, connect the sync cable to the bottom of your device.
Do not press the sync button until you are instructed to do so.
4.
Connect the charger cable to the charger jack.
You are now ready to synchronize. Go to "Synchronizing Information—The Basics" on the
next page.
34
Sync Cable
Sync Button
Charger
Cable
Section 1C: Synchronizing