Palm Treo 700p User Manual page 41

6.
During the installation process, synchronize your new Treo device with your
new desktop synchronization software as instructed. When prompted, do
the following:
Connect your new device to your computer (see "Connecting Your Treo
Device to Your Computer" on page 32).
Indicate whether you want to sync all applications or only PIM (personal
information management) applications.
Select a device name for your new device; be sure to select the same
name that you used for your old device. (This is the name that appears
in the User list in Palm Desktop software.)
7.
(Mac users only) If you have pictures on your old device, copy them from your
old device to an expansion card or beam them to your new Treo device.
8.
If you plan to continue using your old device, perform a hard reset to
remove its associated device name. (See the documentation that came with
your old device for instructions on performing a hard reset.) Each device you
synchronize with your computer must have a unique name. The next time
you synchronize your old device with your computer, be sure to assign it a
new name.
If any third-party applications are quarantined during the installation, do not
manually install any of the quarantined files. Contact the third-party developer
for software updates and information about compatibility with your new device.
Section 1C: Connecting to Your Computer 29