Charging The Battery - Palm Treo 700p User Manual

Charging the Battery

The battery comes with a sufficient charge to complete the setup process and
activate your phone. After activation, we recommend charging your device for
three and a half hours to give it a full charge. See "Maximizing Battery Life" on
page 16 for tips on maximizing the life of your device's battery.
1.
Plug the AC charger into a wall outlet.
2.
Connect the charger cable to the charger jack on the bottom of the device.
Make sure the arrow on the connector is facing up, toward your Treo device
screen.
3.
To confirm that your device is charging, check the indicator light.
Red indicates that your device is charging.
Green indicates that your device is fully charged.
Section 1A: Device Setup
Indicator Light
13