Palm Treo 700p User Manual page 310

To turn off Keyguard, do the following:
1.
If the screen is off, press Power/End
up the screen.
2.
Press Center
To turn on Keyguard, press Option
press Power/End
You can change how quickly Keyguard turns on, or you
can disable the feature altogether. To change the
Keyguard settings, do the following:
1.
Go to Applications
2.
Select Keyguard.
3.
Select the Auto-Keyguard pick list, and then do one of the following:
Select how quickly you want Keyguard to turn on
off, 5 seconds after power off, or 30 seconds after power off.
Select Disabled to completely disable the Keyguard feature until you turn
it on again.
4.
Select Done.
Note:
298
to turn off Keyguard.
.
and select Prefs
If you disabled Keyguard, you can turn Keyguard on manually by pressing
Option + Power/End when the screen is on. If you use this method,
Keyguard stays on only until you press Center to turn it off; it does not
come back on. To permanently re-enable Keyguard, follow the preceding
procedure and select one of the options from the Auto-Keyguard list.
to wake
and then
.
:
Section 6B: Customizing Your Device
When power is turned