Palm Treo 700p User Manual page 327

System Reset
A system reset, also called a safe or warm reset, can be useful if your device loops
or freezes during a soft reset. Performing a system reset allows you to get out of
the loop and restores limited functionality to your device in order to uninstall a
third-party application that's causing the problem. Note that after a system reset,
you must perform a soft reset to restore full functionality, including the wireless
features, to your device.
1.
Press the Battery Door Release button and slide the battery door downward
to remove it from your Treo 700
2.
While pressing and holding Up
the stylus to gently press the reset button on the back of your device.
3.
When the logo screen appears, release Up
4.
Delete the third-party application that you suspect is causing the problem.
5.
Perform a soft reset.
Hard Reset
A hard reset erases all information and third-party software on your Treo 700
smart device. Never perform a hard reset without first trying a soft and a system reset.
You can restore previously synchronized information the next time you
synchronize.
Note:
Section 7A: Help
Your device might not re-establish a Sprint PCS Vision® session after a
hard reset. To manually establish a new Sprint PCS Vision session, open
the Web browser to access a Web site.
smart device.
P
on the 5-way navigator
.
, use the tip of
P
315