Palm Treo 700p User Manual page 192

Sprint pcs service power vision smart device
Hide thumbs Also See for Treo 700p:
Table of Contents

Advertisement

Note:
Setting Up Your Computer for a Bluetooth DUN Connection
Dial-up networking must be enabled or installed on your computer. Follow the
instructions from the manufacturer of your Bluetooth adapter to enable DUN.
Your wireless service provider may provide customized software programs that
walk you through the DUN setup process. Check with your wireless service
provider to see if such a program is available.
Accessing the Internet Using a Bluetooth DUN Connection
The steps for accessing the Internet on your computer may vary depending on
your operating system and how Bluetooth wireless technology is set up on your
computer—for example, if it is built in versus if you are using a wireless
Bluetooth adapter. If the following procedure does not work with your computer,
check your computer's documentation for how to set up Bluetooth technology to
access the Internet using a DUN connection.
Note:
Before you begin, verify that DUN is enabled on both your computer and your
device.
180
Section 3F: Using Bluetooth® Wireless Technology and Dial-Up Networking
You must enter the same passkey on your device and your computer. We
recommend that you use a passkey of 16 digits, where possible, to
improve the security of your Treo device. The longer the passkey, the
more difficult it is for the passkey to be deciphered.
You may need to use a virtual private network (VPN) to access corporate
email. Check with your system administrator for more information.

Advertisement

Table of Contents
loading

Table of Contents