2.
Fix the cooling unit to the cart with two screws (M5x12) in the front.
3.
Install the Master M device on top of the cooling unit. Refer to "Installing cooling unit (optional)" on page 11 for
installation details.
4.
Secure the transportation handle to the cart with an additional bracket and a screw (M8x16).
To install the Master M device on the T32A cart:
1.
Install the Master M device on the cart.
2.
Fix the device to the cart with two screws in the front (M5x12).
The T32A cart must be in horizontal position during welding.
© Kemppi
15
Master M 205, 323
Operating manual - EN
1922130 / 2313