Install The Heat Shield - barbas Cuatro-7 75-60 Installation And Maintenance Manual

Maintenance
7.
8.
10.6.8

Install the heat shield

Only do this procedure after finish of the procedure in section 10.6.7.
1.
2.
52
Make sure the upper baffle is still in
the correct position.
If the upper baffle is not in the correct
position, remove the lower baffle and
put the upper baffle in the correct
position and install the lower baffle
again.
Move the heat shield up and put the
rear side above the upper baffle (1).
Move the front of the heat shield up
(2) and put the edge on the metal
strip under the air wash inlet (3).
2
1
1
3
2
Cuatro-7 75-60