Table of Contents
Advertisement
Installation in an existing open fireplace
7.
8.
9.
7.4
Aligning with adjustable feet
1.
2.
7.5
Final check on the appliance
1.
2.
3.
4.
30
Attach the flue pipe connector to the appliance with the 4 screws. Make sure the
white gasket is in the correct position.
Put a layer of ceramic wool on the top of the appliance. Refer to section
specifications of the ceramic wool.
Put all the interior parts in the correct position in the appliance. Refer to section
for instructions.
Adjust the adjustable feet. Use a 13
mm fork spanner.
Align the appliance horizontal. Use a
spirit level.
Make sure the door closes and opens easy.
Make sure the control lever moves easy to left and right without undue noise.
Make sure all cast iron plates, the grate and the baffles are in the correct position.
Contact your dealer if the final check shows a defect.
5.1
for
10.5
Cuatro-7 75-60
Advertisement
Table of Contents
