3.
4.
10.7
Opti-Air system
1.
2.
3.
4.
Post requirements
•
Change the 9 V back-up battery every
year.
Cuatro-7 75-60
Turn the screw down with a 3 mm
hexagonal key until it is in the screw
hole in the heat shield.
Turn the nut up with a 10 mm fork
spanner and tighten it.
Remove the ventilation air inlet grate.
Get the battery holder. Put a
screwdriver in the small notch of the
lid and pull out the battery.
Replace the 9 V battery and close
the battery holder.
Put the battery holder and ventilation
air inlet grate back.
Maintenance
53