Table of Contents
Advertisement
Installation in a new fireplace
1.
2.
3.
4.
5.
6.
8.4
Horizontally align the appliance
8.4.1
Aligning with adjustable feet
1.
2.
32
If applicable, put carrying tubes (Ø38
mm) in the optional adjustable height
frames. You can use the carrying
tubes to move the appliance.
Note: The carrying tubes
are not included with the
appliance.
Install the appliance. Make sure the
distance between the appliance and
rear wall is approximately 10 cm
minimum.
Make sure there is minimum 3 mm gap between the bottom of the air box and the
floor.
Remove the carrying tubes.
Make sure the door opens and closes correctly.
Refer to section
5.2
for measures to be taken when installed against a flammable
rear and/or side wall.
Adjust the adjustable feet. Use a 13
mm fork spanner.
Align the appliance horizontal. Use a
spirit level.
Cuatro-7 75-60
Advertisement
Table of Contents
