Install The Grate - barbas Cuatro-7 75-60 Installation And Maintenance Manual

1.
2.
3.
4.
5.
10.6.5

Install the grate

Only do this procedure after finish of the procedure in section 10.6.4.
1.
2.
Cuatro-7 75-60
Put the top of a cast iron rear panel
in the U-shaped holder (1).
Move the panel to a vertical position
(2).
Lower the panel (3).
Repeat this procedure for the other
cast iron siderear panels. If
necessary to install a cast iron side
panel, move a steel bottom plate to
the center.
Install the fitting piece on the right of
left of the rear wall. Move the bottom
plate to the center to let you install
the fitting piece.
Put a grate on the ashtray with the
short side in the direction of the rear
wall and move to the rear as far as
possible
Put the other grate plate with the
short side in the direction of the front
of the combustion chamber. Move
the grate as far as possible to the
front of the bottom of the combustion
chamber.
Maintenance
1
3
3
2
2
1
3
1
2
49