Table of Contents
Advertisement
Installation in a new fireplace
8.8
Connect the convection set (optional)
1.
2.
3.
4.
5.
6.
The convection air outlet can go via the front of the appliance and/or the top of the
appliance.
•
Outlet of the convection air at the front of the appliance: refer to section 8.8.1.
•
Outlet of the convection air on top of the appliance: Refer to section 8.8.2.
36
On the convection air box select one
of the 2 inlet openings, identified by
FAN, on the left or right side.
Remove 1 break out plate in the
selected convection air inlet opening
with a hammer.
Put the collar adaptor in the open
inlet opening (1).
Bend out the 3 lips on the collar
adaptor (2) and turn the adapter until
it locks.
Connect a flexible aluminum pipe (C)
on the collar adaptor . Use a hose
clamp (B).
Connect the flexible aluminum pipe to a fitting box in the chimney breast
2
1
2
B
A
C
B
Cuatro-7 75-60
C
Advertisement
Table of Contents
