Using The Appliance For The First Time - barbas UNIVERSAL-6 85 Instructions For Use & Maintenance Manual
Wood-burning appliance
Hide thumbs
Also See for UNIVERSAL-6 85:
Table of Contents
Advertisement
UNIVERSAL-6 85
4
USING THE APPLIANCE FOR THE FIRST TIME
4.1
GENERAL
Allow your home to dry properly, after you have had your chimney breast modifi ed or
newly built. Walls which have not been allowed to dry properly are a magnet for dust
such as any smoke particles created when stoking up the appliance or suddenly
opening the door.
Even scorched dust can easily be retained by damp walls. Think also of dust on the
outside of the appliance or on hot radiators, lamps etc.
Check that all packaging, stickers etc. and/or all dust and waste has been cleaned up
after the installation work (to avoid it getting scorched/causing a bad smell).
The appliance is coated with a lacquer layer resistant to high temperature.
During the fi rst hours of operation, the burning in of the lacquer may result in an unplea-
sant smell. This is harmless, however.
To speed up the process, the appliance should be allowed to run for a few hours at the
correct heat level, with adequate ventilation for the room in question.
After using your appliance for the fi rst few times, you may be aware of a light deposit
on the inside off the glass. This is caused by the paint curing. Once your appliance has
cooled down, this deposit can be removed with glass cleaner or ceramic hob cleaner.
At the start of the heating season, check that the fl ue/chimney is not blocked, for
instance by birds' nests etc.
4.2
INCLUDED
Documentation
Attributes
N.B. If any part is missing, please contact your dealer.
Instructions for use
•
Instructions for use
•
Installation instructions
•
Glove (Heat resistant up to max. 95°C)
•
Operating hook / Poker
•
Cover plates
11
Advertisement
Table of Contents
