The Adv7611 Evaluation Platform In Depth; Hardware Overview; Connectors; Jumpers - Analog Devices Advantiv EVAL-ADV7611EB1Z Evaluation Note

Eval Note

5. The ADV7611 Evaluation Platform in Depth

5.1 Hardware Overview

The following features of the ADV7611 evaluation board should be noted

5.1.1 Connectors

1. 1 x HDMI inputs (J2)
2. 1 x HDMI output (J9)
3. 1 x UART connector (J7)
4. 1 x USB connector (J1)
5. 1 x audio output (U58)
6. 1 x S-video output (p5)
7. 1 x CVBS output (p3)
8. 1 x component (p4)
9. 1 x AV output connector (P7

5.1.2 Jumpers

1. MCU boot ROM location (K7) – default position 'B'
2. MCU reset (K8) – default position 'not inserted'
3. USB MCU (K6)
4. I2C switch (K5)
5. MCU I2C (SDA, SCL) – default position inserted
6. Audio reset (J3)
7. Microcontroller reset control (K9) – default position 'not inserted'
8. INT 2 reset (K1, K2)
5.1.3 Switches & Buttons
1. ON/OFF (S5)
2. Software enable/disable (S3)
3. DUT reset (S1)
4. MCU reset (S4)
5. global reset (S2)
6. Software driver buttons (S_UP, S_DOWN, S_LEFT, S_RIGHT, S_SELECT, S_BACK )

5.1.4 Miscellaneous

1. 1x 20 way connectors (J6)
2. 1 x 12 way connectors (J5)
3. Software driver LEDS (LED1, LED2, LED3, LED4, LED5, LED6)
4. Audio channel LEDS (AUD_CH1, AUD_CH2, AUD_CH3,AUD_CH4)
5. I2C header (P1)
Rev. PrA Page 9 of 31