Table of Contents
Advertisement
The system prompts the setting succeeds.
Step 2: When the BootWare main menu appears again, select 0 to reboot the system.
System starts booting ...
Step 3: Set a new password in system view after reboot.
[H3C]user-interface con 0
[H3C-ui-aux0]authentication-mode password
[H3C-ui-aux0]set authentication password simple 123456
The above information indicates that the password authentication is adopted at the console interface
and the password is set to 123456 and stored in plain text.
After reboot, the system runs with the initial default configuration, but the original configuration file
is still stored in the Flash. To restore the original configuration, you can use the display
saved-configuration command to display it, and then copy and execute it.
If the password is stored in plain text, you can use the display current-configuration command to
see the password in the current configuration. If you use the set authentication password cipher
123456 command to set a password, the password is stored in cipher text.
Step 4: Save the new password.
[H3C] save
Execute the save command after modifying the user password to save the new password.
BootWare Password Loss
Contact the agent or the technical support personnel to set a new password in the event of BootWare
password loss.
You can modify the BootWare password in the BootWare main menu.
Select 5 in the BootWare main menu to modify the password. The console terminal displays:
Change password.
Old password:
New password:
Verify:
........Password Set Successfully.
Enter the old password
Enter a new password
Enter the new password again
The new password is set successfully
5-20
Advertisement
Table of Contents
