Annex 2: System Turn Off Progress List - Pylontech PowerCube-X1-V2 Operation Manual

☐
13

Annex 2: System Turn OFF Progress List

Tick
after
No.
completio
n
☐
1
☐
2
☐
3
operation. It will begin from lowest voltage
battery string to do the parallel operation
during the charging.
If the status LED of BMS turns to green, it
means this battery
operation.
If the system need black start,
Soft-off the PCS through PCS's control panel.
Turn off the switch between PCS and
battery string (PowerCube-X1/X2-V2), or turn
off the power switch of PCS, to make sure no
current through this battery string.
Turn off all the "Power Switch" of the Control
Module.
49
string is in parallel
Item
charging
progress.
Refer
chapter 3.7.
Remark
Refer
chapter 3.8.
this
Refer
chapter 3.8
Refer
chapter 3.8
to
to
to
to