Fusible Link Replacement; Break Rod Replacement - Broaster VF-2 Service & Parts Manual

14. Loop cable through side wall into
cooking chamber and attach new
fuse-link cable (10) using "S" hook (18)
and new Fusable link (19). Draw the
cable taut and crimp cable clamp to
secure.
18
15. Reattach spring (8) to lever arm (7).
16. Reconnect the heavy black pressure
switch wires (12) to C1 ON/OFF Relay
(13) and C1 Contactor (14).
17. Remove safety pin (6) to arm system.
19
10
broaster.com Manual #16501 8/06 Rev 02-15

FUSIBLE LINK REPLACEMENT

1. See Fire Extinguisher Replacement,
Step 1-4.
2. Remove fusible link. (19)
3. For re-assembly see FIRE EXTIN-
GUISHER REPLACEMENT steps 12 to
14.
4. Remove safety pin (6) to arm system.

BREAK ROD REPLACEMENT

1. See Fire Extinguisher Replacement,
Step 1-2.
2. Use a 1/8" Allen key to remove the
allen screw (20) in the rod holder on
the right hand side.
3. Remove any remaining parts of the old
break rod.
4. Insert new break rod (21).
5. Insert allen screw (20) and tighten until
the rod is not sliding left or right. Be
careful not to overtighten or the rod
will break.
6. Remove safety pin (6) from fire extin-
guisher.
7. Replace Access Panel.
3-7
21
20