Download Print this page

Horizon Fitness 7.4AT Owner's Manual page 6

Hide thumbs Also See for 7.4AT:

Advertisement

Available languages

Available languages

SPEAKERS
CONSOLE
WATER BOTTLE HOLDER
PULSE RATE GRIPS
ON/OFF SWITCH
POWER CORD
MOTOR COVER
CONSOLE MAST COVER
CAUTION
WARNUNG
KEEP HANDS AND FEET AWAY
HALTEN SIE HÄNDE UND FÜSSE
FROM THE MOVING PARTS.
VON BEWEGLICHEN TEILEN FERN.
TRANSPORT WHEEL
FOOT LOCK LATCH DECAL
(UNDERNEATH FOOT LATCH)
10
TABLET/READING RACK
CONTROL PANEL AND DISPLAY WINDOWS
CONSOLE FAN
SAFETY KEY PLACEMENT
CROSS SUPPORT BAR
CONSOLE MAST
FOOT LATCH (UNDERNEATH DECK)
RUNNING BELT/RUNNING DECK
SIDE RAIL
ROLLER END CAP
REAR ROLLER
TENSION/ALIGNMENT BOLTS
PRE ASSEMBLY
TOOLS INCLUDED:
F
8 mm T-Wrench
UNPACKING
F
6 mm L-Wrench
5 mm L-Wrench
F
Place the treadmill carton on a level flat surface. It is recommended that you place a protective
covering on your floor. Take CAUTION when handling and transporting this unit. Never
PARTS INCLUDED:
open box when it is on its side. Once the banding straps have been removed, do not lift or
transport this unit unless it is fully assembled and in the upright folded position, with the lock
F
1 Main Frame
latch secure. Unpack and assemble the unit where it will be used. The enclosed treadmill is
equipped with high-pressure shocks and may spring open if mishandled. Never grab hold of
1 Console Assembly
F
any portion of the incline frame and attempt to lift or move the treadmill.
F
2 Console Masts
F
2 Console Mast Covers
F
1 Cross Support Bar
WARNING
F
1 Hardware Kit
1 Safety Key
F
DO NOT ATTEMPT TO LIFT THE TREADMILL! Do not move or lift treadmill from
F
1 Audio Adapter Cable
packaging until specified to do so in the assembly instructions. You may remove the
F
1 Bottle of Silicone Lubricant
plastic wrap from console masts.
(for 2 applications)
F
1 Power Cord
2 Pulse Rate Grips
WARNING
F
NEED HELP?
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!
If you have questions or if there
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place and partially
are any missing parts, contact
threaded in before completely tightening any ONE bolt.
Customer Tech Support. Contact
NOTE: A light application of grease may aid in the installation of hardware. Any grease, such
information is located on the
as lithium bike grease is recommended.
back panel of this manual.
11

Advertisement

loading