Horizon Fitness 7.4AT Owner's Manual page 5

Available languages

ASSEMBLY

WARNING

There are several areas during the assembly process that special attention must be paid. It is very important to follow the assembly

instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill

could have parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the treadmill, the

assembly instructions must be reviewed and corrective actions should be taken.

Before proceeding, find your treadmill's serial number located on a white barcode sticker near

the on/off power switch and power cord and enter it in the space provided below.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOXES BELOW:

» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.

SERIAL NUMBER:

HORIZON 7.4AT TREADMILL

MODEL NAME:

SERIAL NUMBER LOCATION

Table of Contents