I
C K 3
N T E R M E C
Wavelink TelnetCE Configuration
A config file available from Epicor Dimensions, "DimCK3.wltna", for the wireless
connection is also required before beginning.
1. Run the Wavelink install program. Accept all default parameters.
2. Once completed, the TelnetCE program will launch.
3. Click Import/Export Settings. The following screen will appear:
Revised: March 21, 2012
H
U
A N D H E L D
S E R
Appendix: Printing from a Mobile Device
G
U I D E
37