Intermec CK3 Instructions

Vehicle Dock Mounting Kit Instructions

You can use the vehicle dock mounting kit to install a vehicle dock on your vehicle.
This kit includes:
•
One RAM mount
TM
•
Four #8 screws
•
Four #10 screws
•
Four Nylok nuts
•
One optional offset plate

To install the mounting kit

1
If you need additional cable clearance between the vehicle dock and the RAM
mount, use four #8 screws to attach the offset plate to the vehicle dock.
2
If you attached the offset plate in Step 1, use four #10 screws and the Nylok nuts
to attach the RAM mount to the offset plate.
If you are not using the offset plate, use four #8 screws to attach the RAM
mount directly to the vehicle dock.
3
Attach the RAM mount base to a solid surface on your vehicle.
#8 screw
(4 places)
#10 screw
(4 places)
The CK3 vehicle dock is shown as an example.
Vehicle dock
Nylok nut
(4 places)
Offset plate
RAM mount