Appendix: Printing From A Mobile Device; Printing To A Bluetooth Mobile Printer - Intermec CK3 User Manual

I C K 3
N T E R M E C

Printing to a Bluetooth Mobile Printer

To print to the Intermec PB 32 Bluetooth mobile printer, use the following setup
steps. Some of these steps may already have been completed for you.
1. Click the Windows Start button and select the System tab.
2. Open Wireless Printing.
3. Ensure the printer is turned on and select Search.
4. When the search is completed, the printer will display in the results list as
PB32-12345678901, where 12345678901 is the serial number of the
printer itself.
5. Select the printer to highlight it and press Set.
6. Press Close.
7. Select the Connections tab.
8. Select Bluetooth.
9. Select Add new device...
10. When the search is completed highlight the printer and press Next.
11. When prompted for a passcode enter 1234 and press Next.
12. When the "Add new device..." window re-appears with the new printer
displayed, tap the printer name. The Partnership Settings window opens.
13. Select Serial Port so a checkmark appears, then press Save to return to
the "Add new device..." window.
14. Select the COM Ports tab.
15. Tap New Outgoing Port.
16. Ensure the new printer is highlighted and press Next.
17. Ensure COM4 is shown in the drop-down list window and that Secure
Connection has a checkmark beside it and click Finish.
18. Click OK to exit the Bluetooth setup and click the X in the upper-right
corner to close the Settings window.
Revised: March 21, 2012
H U
A N D H E L D S E R
Appendix: Printing from
G
U I D E
a Mobile Device
43