Integration Into Knx Systems; Knx Signals - HMS Networks Intesis IN776MHI00XO000 User Manual

Mitsubishi heavy industries vrf with knx, serial and ip support

Hide thumbs

Table Of Contents

Table of Contents

Integration into KNX Systems

6.2. Integration into KNX Systems

6.2.1. KNX Signals

The following tables list all available KNX signals for this gateway.

NOTE

Physical Address: The gateway supports (P/S) and (P/I/S) format levels.

NOTICE

Communication object flags:

• Ri (Read on initialization): The gateway requests this signal's updated data after an initialization

instead of waiting for a change in the signal.

• R: The KNX system can read this signal.

• W: The KNX system can write this signal.

• T: The KNX system receives a telegram when this signal changes its value.

• U: This signal's data is updated after a reboot of either the gateway or the bus.

Table 4. Global signals

Description

Status_Gateway Communication Status

Control_On/Off (all units)

Control_Operating Mode (all units)

Control_Fan Speed (all units)

Control_Setpoint (all the units)

Control_Remote Lock/Unlock (all the units)

Table 5. Outdoor units

Description

Status_OU Compressor 1 Frequency

Status_OU Compressor 2 Frequency

Status_OU Heat Exchange low 1 temperature

Status_OU Heat Exchange low 2 temperature

Status_OU Heat Exchange low 3 temperature

Status_OU Heat Exchange low 4 temperature

Status_OU Heat Exchange high 1 temperature

Status_OU Heat Exchange high 2 temperature

Status_OU Heat Exchange high 3 temperature

Status_OU Heat Exchange high 4 temperature

USER MANUAL Version 1.2

Mitsubishi Heavy Industries VRF with KNX, Serial and IP support

Function

0-No Error, 1-Failure

0-Off, 1-On

0-Auto, 1-Heat, 3-Cool, 9-Fan, 14-Dry

0-Auto, 1-Heat, 2-Dry, 3-Fan, 4-Cool

0-Cool, 1-Heat, 2-Fan, 3-Dry, 4-Auto

0-Low, 1-Medium, 2-High, 3-Powerful

16..30ºC / 60..86ºF

0-Unlock, 1-Lock

Function

DPT

14.033-DPT_Value_Frequency (4byte)

ºC / ºF