Technical Specifications - HMS Networks Intesis IN776MHI00XO000 User Manual

Mitsubishi Heavy Industries VRF with KNX, Serial and IP support

5.6. Technical Specifications

Plastic, type PC (UL 94 V-0)
Color: Light Grey. RAL 7035
• Net dimensions (DxWxH):
Millimeters: 90 x 106 x 58 mm
Enclosure
Inches: 3.5 x 4.2 x 2.3"
• Clear space for installation (DxWxH):
Millimeters: 130 x 115 x 100 mm
Inches: 5.1 x 4.5 x 3.9"
Wall: M3 screws, 25 mm (1") length. Below 2 meters
(6 feet)
Mounting
DIN rail EN60715 TH35
Per terminal: solid wires or stranded wires (twisted
or with ferrule)
Terminal Wiring
• 1 core: 0.5 .. 2.5 mm
• 2 cores: 0.5 .. 1.5 mm
(for power
supply and low-
• 3 cores: not permitted
voltage signals)
Use class 2 cables for cables longer than 3.05 meters
(10 feet)
• For DC: 12 to 36 VDC +/-10%, Max: 250 mA
• For AC: 24 VAC +/-10%, 50-60 Hz, Max: 127 mA
Power
Recommended: 24 VDC, Max: 127 mA
1 x Green pluggable terminal block (3 poles)
Port EIA-485 SG (Reference ground or shield), B-, A+
1500 VDC isolation from other ports
Ethernet 1 x Ethernet 10/100 Mbps RJ45
Port KNX 1 x Orange pluggable terminal block (2 poles)
2 x DIP switch (3 position) blocks for EIA-485 serial
port configuration:
Position 1
• On: 120 Ω termination active
DIP switches
• Off: 120 Ω termination inactive
SW A and SW B
Position 2 and 3
• On: Polarization active
• Off: Polarization inactive
Page 22 of 36
Binary Inputs
2
(24 to 11 AWG)
2
(24 to 15 AWG)
Push Button
Console Port
Operational
Operational
Protection IP20 (IEC60529)
1 x Green pluggable terminal block (4 poles)
I1, I2, I3, and Common
1500 VDC isolation from other ports
Common functionalily
• Factory reset
Specific functionalities
• BACnet: To send I-Am message to all BACnet
ports
• KNX: To switch between normal and
programming modes
USB Mini-B type 2.0 compliant
1500 VDC isolation
AC-Port A: Serial, 2 poles (Reserved for future use)
AC PORTS AC-Port B: Serial, 3 poles (Reserved for future use)
AC-Port C: Serial, 2 poles
Celsius: 0 .. 60°C
Temp.
Fahrenheit: 32 .. 140ºF
5% to 95%, no condensation
Hum.
2 x Run (Power/Error)
2 x Port EI485 TX/RX
2 x Port KNX TX/RX
1 x Button indicator
LEDs
2 x Ethernet Link/Speed
2 x AC Port A TX/RX
2 x AC Port B TX/RX
2 x AC Port C TX/RX
Technical Specifications
USER MANUAL Version 1.2