Integration Into Knx Systems; Knx - HMS Networks Intesis IN776MHI00 O000 Series User Manual

Integration into KNX Systems

6.2. Integration into KNX Systems

6.2.1. KNX

The following tables list all available KNX signals for this gateway.
NOTE
Physical Address: The gateway supports (P/S) and (P/I/S) format levels.
NOTICE
Communication object flags:
• Ri (Read on initialization): The gateway requests this signal's updated data after an initialization
instead of waiting for a change in the signal.
• R: The KNX system can read this signal.
• W: The KNX system can write this signal.
• T: The KNX system receives a telegram when this signal changes its value.
• U: This signal's data is updated after a reboot of either the gateway or the bus.
Table 5. Global signals
Description
Status_Gateway Communication Status
Control_On/Off (all units)
Control_Operating Mode (all units)
Control_Operating Mode (all units)
Control_Operating Mode (all units)
Control_Fan Speed (all units)
Control_Setpoint (all the units)
Control_Remote Lock/Unlock (all the units)
USER MANUAL Version 1.2.7
Mitsubishi Heavy Industries VRF with KNX, Serial and IP support
Function
0: No Error 1.005-DPT_Alarm (1bit)
1: Failure
0: Off 1.001-DPT_Switch (1bit)
1: On
0: Auto 20.105-DPT_HVACContrMode (1byte)
1: Heat
3: Cool
9: Fan
14: Dry
0: Auto 5.x (1byte)
1: Heat
2: Dry
3: Fan
4: Cool
0: Cool 5.x (1byte)
1: Heat
2: Fan
3: Dry
4: Auto
0: Low 5.x (1byte)
1: Medium
2: High
3: Powerful
Celsius: 16 .. 30°C 9.001/9.027-DPT_Value_Temp (2byte)
Fahrenheit: 60 .. 86°F
0: Unlock 1.002 DPT_Bool (1bit)
1: Lock
DPT Flags
R, T
W
W
W
W
W
W
W
Page 25 of 36