Connection Procedure For Knx - HMS Networks Intesis IN776MHI00XO000 User Manual

Connection

5.2.4. Connection Procedure for KNX

NOTE
Remember to check the
1. Connect the KNX TP communication cable to the gateway's KNX port.
IMPORTANT
Observe polarity.
2. Use the supplied USB Mini-B type to A type cable to connect the gateway, through its USB port, to a PC to
configure it with Intesis MAPS.
NOTE
You can use the Ethernet port to connect the gateway and the PC instead.
NOTICE
Find all you need to know about the gateway configuration and Intesis MAPS in the
IN776MHI00xO000 Gateway Configuration Guide.
NOTICE
See the wiring diagram in the Figure:
USER MANUAL Version 1.2
Common Connections (page
General view of all gateway connectors (page 10)
Mitsubishi Heavy Industries VRF with KNX, Serial and IP support
12).
Page 15 of 36