HMS Networks Intesis IN776MHI00XO000 User Manual page 17

Mitsubishi Heavy Industries VRF with KNX, Serial and IP support
2. Use the supplied USB Mini-B type to A type cable to connect the gateway, through its USB port, to a PC to
configure it with Intesis MAPS.
NOTE
For Modbus RTU only, you can use the Ethernet port to connect the gateway and the PC instead.
NOTICE
Find all you need to know about the gateway configuration and Intesis MAPS in the
IN776MHI00xO000 Gateway Configuration Guide.
NOTICE
See the wiring diagram in the Figure:
Page 14 of 36
General view of all gateway connectors (page 10)
Connection
USER MANUAL Version 1.2