Led Indicators - HMS Networks Intesis IN776MHI00XO000 User Manual

Mitsubishi Heavy Industries VRF with KNX, Serial and IP support

5.4. LED Indicators

LED Color
LED 1 (PWR) Green Power on (not programmable)
LED 2 (ERR) Red Blinking: Hardware error
LED 3 Green 485 Tx (RS485 for BACnet or Modbus)
LED 4 Yellow 485 Rx (RS485 for BACnet or Modbus)
LED 5 Green KNX Port Tx
LED 6 Yellow KNX Port Rx
KNX: Programming mode on
BUTTON LED Green BACnet: BACnet link established
Modbus and Home Automation: Not used
LED 7 Green Ethernet link established
LED 8 Yellow Ethernet speed
LED 9 Green AC-Port A Tx (HBS)
LED 10 Yellow AC-Port A Rx (HBS)
LED 11 Green AC-Port B Tx (RS485)
LED 12 Yellow AC-Port B Rx (RS485)
LED 13 Green AC-Port C Tx (UFO-SLQ): It shows Superlink activity
LED 14 Yellow AC-Port C Rx (UFO-SLQ): It show Superlink activity
NOTE
LEDs are hidden behind the four frontal labeled covers. These covers are assembled by pressure, so
you just need to pull them to remove them.
Page 20 of 36
Description
Top side
Bottom side
Figure 6. The gateway with the covers already removed
LED Indicators
USER MANUAL Version 1.2