Resuming From An Error - Epson Equity IIe User Manual

perform the test once, select 1. The program then displays a
To
submenu of more detailed tests for the device you are checking.
To perform the test multiple times, select 2. You see this
prompt:
Terminate
Select Y to terminate checking if the device produces an error,
or to repeat the tests regardless of an error. You see this
prompt:
To perform the test once, press
If you wish to repeat the test more than once, type the number
of times and press
message on the screen during the tests:
If you see an error while one of the tests is running, press any
key to terminate the tests.

Resuming From an Error

If an error occurs during a test, the test stops at that point, and
an error code and error message appear. If you want to record
the problem, you can print out the message on your printer. You
see this prompt:
To continue without printing the error message, select
Enter.
The tests repeat and you see this
Enter.
Performing
System
Diagnostics C-7