Resuming From An Error - Epson Equity 4 User Manual

Use [tl or [rl or type the number of the desired option to
highlight a test and then press (hr*rl to run it.
Note
If you selected to run the tests more than once, you do
not see a submenu. The program immediately begins
executing all tests that do not destroy data.
5. When the test is completed, you see the Execute menu or the
test submenu again. You can select another test or exit the
menu.
To exit System diagnostics, press [-1l to select Quit and
press m You return to the operating system command
prompt.

Resuming From an Error

If an error prevents a test from running, you see a Runtime
Error information box. Follow the instructions on the screen to
solve the problem.
If an error occurs during a test, the test stops and an error
message appears. Follow the instructions on the screen to print
the message or to continue without printing it.
For a complete list of the error messages the program may
display, see the table at the end of this chapter.
4-6
Running System Diagnostics