Epson Equity IIe User Manual page 236

To start this test, select
from the Hard Disk Format Menu. You see these
messages:
As the program checks each track, it counts the cylinder
numbers (nnnn) down to zero. When the test is complete, the
program displays a report on the status of the disk, including a
table of unflagged tracks that produced write, read errors-such
as the following:
Analysis finished.
Count of tracks flagged bad
Count of tracks with write, read errors
Count of good tracks
No write, read error was detected.
No data was destroyed.
Press ENTER to return to the menu.
If the program finds one bad track that is not flagged, the
summary would show one track with a write, read error. The
report is followed by a table like this:
2
237
to
tracks.
2-Destructive surface
nnnn
in Write,
Physically Formatting a Hard Disk
=
n
n
=
= nnnn
I
D-11